Check Out 3 Simple Steps on How to Clear a Cloudy Pool

A swimming pool is definitely an exhilarating water feature that offers you a lot of benefits. It doesn’t only fun to enjoy, but it can also support your healthy lifestyle. However, as time goes by, you may have to face some problems, especially when you don’t maintain the pool properly.

Cloudy water is one of the most common problems that you will have to deal with when you have a swimming pool. Of course, it’s a very annoying buzz killer when you are about to enjoy your beloved swimming pool.

The cloudiness of pool water can be caused by various factors which means that you have to properly know the root of the problem before you solve it. Some common causes of cloudy pool water include:

  • Imbalance Chemical – This is the most famous factor when it comes to the cloudy pool water. It’s when the chemistry of the water is not in the ideal range.
  • Too Much Chlorine – Sometimes, you may add too much chlorine which is above the recommended amount.
  • Pump or Filter – When these two components don’t work properly, they also can create cloudiness in your pool water.
  • Other Causes – The other factors that can also cause cloudy water are weather conditions, source of water, and overuse of the pool.

(You may also like: How to Power pH in Pool | Safe and Easy Tutorial with Only 5 Steps)

When you face this kind of circumstance, don’t be panic, you can actually fix the problem all by yourself by using easily available supplies. The tutorial on how to clear a cloudy pool below will show you the simple ways to fix the problem.

How to Clear a Cloudy Pool

As has been mentioned above, knowing the root of the problems that cause cloudy pool water is an essential step that you need to know. You can’t just guess what the cause is, but you have to properly check it.

Test the Water

Since the most common cause of cloudy pool water is an imbalance chemical, testing the water is a wise choice for the first step.

Prepare these supplies:

  • Pool water tester strip or kit
  • Any chemicals needed

Follow these steps:

  • If you use a tester strip, you just simply need to dip it into the water and see the imbalance chemical of the water.
  • If you use the tester kit, basically you will use a small amount of pool water for the sample then use the chemical as instructed by the manufacturer’s direction.
  • The treatment for each chemical imbalance is different. For instance, if the pH is lower than the ideal range, you need to add soda ash to raise it as shown in this How to Raise pH in Pool Tutorial or if you need to raise the alkalinity you can add baking soda just like this How to Raise Alkalinity in Pool Tutorial will guide you.

Check the Circulation System

If you are sure enough that chemicals of your pool water are in the ideal range, then you need to check the circulation and filtration system.

  • Clean up the debris, dirt, or scaling buildup of the equipment.
  • You may also need to replace the broken equipment.

(Read also: Find the Easy Ways on How to Lower Alkalinity in Pool Safely Here)

Add Clarifier

When you find that all the chemicals and equipment are in good condition but the water is cloudy, you just need to add a water clarifier. It works to collect the tiny particles of the water which help the work of the filtration system.

  • Follow the manufacturer’s instructions on how to use the water clarifier.
  • Run the pump on high speed continuously until the water turn crystal clear.

The cloudy water is definitely a serious problem that doesn’t only make your pool look less appealing but also dangerous to swim, especially when the cause is the imbalance chemicals level. Therefore, you need to take some actions as soon as possible when you experience the case just like the tutorial on How to Clear a Cloudy Pool Tutorial above guide you.

(Recommended to read: How to Lower Chlorine in Pool | Simple Tutorial with Only 6 Steps)

Regular maintenance is always an obligatory job for you as the pool owner to prevent the problem. You can check the level of chemicals regularly simply by using a pool water tester kit.

Keep in mind to always use safety gear like rubber gloves and eye goggles when you are dealing with chemicals like soda ash, sodium bisulfate, or water clarifier since they might harm you. So, let’s add this How to Clear a Cloudy Pool Tutorial to your DIY home maintenance list!

Leave a Reply