Shortly, pH is the term to refer to whether the pool water is acid or alkaline enough. The balance pH level of pool water is obviously important to keep your swimming pool look adorable and feel comfortable at the same time.
The ideal range of pH level of a swimming pool is 7.2 to 7.8 and it’s so common that you will face the imbalance level of pH of your swimming pool. Whether it’s too low or too high, you have to fix it as soon as possible
High pH Level is the most common case that a lot of homeowners deal with. It means that the pH level is above 7.8 which also relates to the high alkalinity of the pool water. The case can be caused by several factors like:
Of course, the high chlorine level is dangerous for you. It can cause several problems relating to your well-being and the pool itself. The most common symptoms that you will feel are skin irritation, dry hair, and red eyes. Then, it can also damage your swimwear overtimes. Moreover, since the alkalinity level is high, you will find the scaling that clogs the pool filter.
(You may also like: How to Lower Chlorine in Pool | Simple Tutorial with Only 6 Steps)
Lowering the level of pH is actually not really that hard and you can do it all by yourself at home. The tutorial on how to lower pH in pool below will show you some steps that you can easily follow to handle the problem.
There are some chemicals that you can use to lower the pH level of pool water. I this tutorial, we’re going to use sodium bisulfate since it’s considered safer than the other option like muriatic acid.
First, you need to test the pH level of your swimming pool. You can do this step when you find some anomalies of your pool water or when you regularly check the chemical of the pool. Some pool experts suggest that you can say the pH level is too high even when it reaches 7.6 point.
As you may have known, sodium bisulfate is dry acid which is made in the form of powder. You have to be careful of dealing with this chemical, keep in mind to wear rubber gloves and eye goggles.
Prepare these supplies:
Follow these steps:
Now, it’s time to add the sodium bisulfate that you have measured to the pool. Remember, try your best not to pour the acid when the day is windy since the powder can get blown into your eyes. Also, pour the acid close to the water surface.
After you have poured the measured acid to the pool, you need to let it dissolve completely in the water. If you have a well-working filtration system, it takes about 15 minutes to settle the acid.
(Recommended to read: Find the Easy Ways on How to Lower Alkalinity in Pool Safely Here)
You can’t actually retest whether the pH level has come to the normal level or not right after the chemical has dissolved. You have to wait at least 24 hours to make it sure.
(Read also: Here’s How to Raise Alkalinity in Pool with Only 6 Easy Steps)
So those are the simple tutorial on how to lower pH in pool that you can do all by yourself. You just need sodium bisulfate which is designed for swimming pool maintenance that you can find easily in nearby stores then follow all the steps of the tutorial above.
As mentioned above, you can also use muriatic acid to lower the pH of pool water but it may be more dangerous than sodium bisulfate. Muriatic acid is better used when you find severe scale buildup in your pool filter since it works can work harder. Whatever chemical that you use, remember to always be safe in dealing with your swimming pool problem.
In addition, below we share some tips to keep the pH level of your pool in the ideal range, such as: