Like it or not, you will eventually find the stains around your gorgeous swimming pool. Overtimes, the calcium buildup can make the pool look less appealing to enjoy or even to look at.
Moreover, the pool’s worst enemy which is algae is most likely to invade your pool. The algae invasion is one of the most common problems that a lot of pool owners have to deal with, especially when you don’t properly maintain the pool on a regular basis. In no time, your pool will turn into a nasty green pond.
When those two cases happen, that is the time to acid wash your swimming pool right away. As the name suggests, you’re going to depend on acid (which is hydrochloric acid or also known as muriatic acid) to clean the pool.
Actually, acid wash is the last effort that you can do when you can’t get the best result after scrubbing and vacuuming the stains – caused by calcium buildup and algae – of your swimming pool. Then, it’s also the very last consideration when you almost give up getting rid of algae invasion that repeatedly happens.
Though you can acid wash a pool all by yourself, you have to be really careful since you are dealing with a harsh chemical. With improper supplies and steps, the chemical may harm you and the pool itself.
(You may also like: How to Backwash a Pool Tutorial with Only 3 Quick Simple Steps)
Below, we share a tutorial on How to Acid Wash a Pool that you can keep in mind.
The inground pools which are made of concrete and gunite are suitable for an acid wash, whereas the ones made of vinyl will not be able to handle the harshness of the chemical.
To acid wash your pool, you need to drain the pool, and you need to have a water disposal plan. In this process, you’re going to drain the pool water and acid-mixed water.
As mentioned above, muriatic acid is a harsh chemical that can be really dangerous for you, so the first thing that you have to do is wear everything that can save you.
Prepare these supplies:
Wear all of the protective gear before you even start acid washing your swimming pool.
To acid wash the pool, you need to drain it first. Remember, you have to carefully drain your pool to avoid any damages. Check out this post about 8 Steps on How to Drain a Pool Easily and Quickly All By Yourself.
(Check this out: 8 Steps on How to Drain a Pool Easily and Quickly All By Yourself)
You have to be really careful in diluting the acid since it may harm you.
In the acid washing process, you’re gonna need a lot of water.
Now, you’re going to deal with the acid directly. You’re gonna need some helps from a friend for this step. Again, always be careful.
After you have finished the process, you need to pour the soda ash again before disposing of the wastewater.
Now, it’s time to finish the cleaning process in which you need to drain the collection pool and rinse it out.
When you are sure enough that the pool is free of dirty water or remaining acid, you can refill it.
(Recommended to read: How to Raise Free Chlorine in Pool Tutorial with Only 4 Quick Steps)
So that is the tutorial on How to Acid Wash a Pool that you can follow. Keep in mind to always be careful and stay safe in finishing the job.