Whether you have an inground or above ground pool, the green water seems like one of the most common problems that you have to deal with. Almost every pool owner should experience this kind of nasty case, and you may be one of them.
Of course, once you notice that your pool water has turned green, you have to solve it as soon as possible. The swimming pool with green water is not really safe to use due to some reasons like the imbalance chemicals of the water and the bacteria that may harm you.
There are some factors that cause the green pool water problem, such as:
(You may also like: How to Vacuum an Above Ground Pool with Only 3 Quick Simple Steps)
Fortunately, you can actually solve the green water problem all by yourself without any needs to call a pro. The tutorial on how to clean a green above ground pool below will guide you to deal with it.
The steps that you need to follow in solving this kind of pool phenomenon are not that tricky. You won’t also spend a lot of money on your available budget.
Once you got all of the supplies, you can start cleaning the water.
The debris and dirt in your pool water don’t only litter the pool but also impact the balance of the chemicals. Therefore, you have to remove them first.
(Read also: Here’s How to Winterize an Above Ground Pool with 10 Simple Steps)
You have to know the level of the chemicals of the water. When everything is in the ideal range, the chlorine will work properly.
To deep-clean the pool, you need to brush the floors, walls, and all the additions. You have to do this step meticulously since just a small amount of algae can turn your water back to green in no time.
To get rid of the living contaminants of your pool water, you have to shock it. The pool shock with more than 70% chlorine is highly recommended.
(Recommended to read: 4 Simple and Easy Ways on How to Lower Cyanuric Acid in Pool)
In the process of clearing up the green water, you have to run the pump of your above ground swimming pool 24/7.
Commonly, your pool water will turn cloudy after the shocking step. Don’t worry, it’s a normal condition and the water will get cleared up any soon.
If you want to make it faster, adding a pool clarifier is allowed. It will make the pool water clear again quickly.
(See also: How to Keep Bees Away from Pool with 5 DIY Steps Safely and Effectively)
To ensure that the pool is free from debris completely, you have to run the filter for another 24-hour long. It’s an essential step to prevent green water from happening again in the future.
Retest the pool water after it has been filtered for 24 hours.
The last step is adding the algaecide and sanitizer to your pool water. It’s the effort that can prevent the algae from invading your above ground swimming pool. Just follow the manufacturer’s direction to find out the amount of algaecide that you have to add to your swimming pool.
(Check this out: How to Drain an Above Ground Pool with only 3 Quick and Easy Steps)
So that is the simple tutorial on How to Clean a Green Above Ground Pool that you can follow to get rid of the green water problem. For sure, it’s a quite long process that requires patience. But if you do it right, the effort is really worth it.
Have a nice try then!