Your beloved swimming pool can look adorable and feel enjoyable with the help of several components that work together side by side. Without them, you won’t be able to have a crystal clear water that everyone can enjoy.
An essential component that keeps your water feel cozy is the pool pump. It moves your water back and forth through the filter which also removes the impurities from the water. The pump is the most expensive equipment of a pool that you obviously have to maintain before it’s broken. You don’t really want to spend a lot of money to replace it in the near future.
So how can you keep the performance of your pool pump? Well, not only the pump but the regular maintenance also keeps all the components in healthy condition all the time. Balancing chemical, sanitizing the water, skimming the debris are some obligations that you have to do regularly to keep everything well.
But sometimes, those maintenance steps are not enough. You may eventually need to prime the pump due to some particular circumstances. But, don’t worry, priming a pump is not really that hard and you can finish the job all by yourself without calling an expert.
(You may also like: How to Clean a Green Pool Fast with Only 5 Effective Steps)
Below, we share a simple tutorial on how to prime a pool pump that you can follow easily.
So, when exactly you need to prime a pump? Well, firstly, you have to know that the pool pump is the equipment which needs to be completely filled with water. Since it works to flow water, when it’s dry, it can’t do anything which can lead to overheating then breaks all the components of the equipment.
As mentioned above, priming is basically getting the water to fill the pump and it’s usually get done when you turn it on after the closing season. Priming may be an obligatory job for you who live in an area with freezing temperatures. When you close the pool, you will dry up your pump to avoid freezing damage, that is the time where air can get inside it. Therefore, you need to prime the pump before you get it back to work.
Priming a swimming pool is not a really complicated job that you can finish in no time all by yourself. However, you need to know the right technique to get the job done correctly.
Whenever you are going to work with the pump, you need to turn it off at first for your safety.
You need to move the water directly to the pool pump instead of the filter, for that you need to recirculate the water.
(Check this out: 9 Easy Steps on How to Change Sand in Pool Filter All by Yourself Quickly)
The air pressure inside the pump should be released before you prime it.
You need to remove the plugs to let the water flow into the pool pump.
Before you fill the pump with water, you have to clean the debris in the pump’s basket and get all the plugs in their place.
Now, it’s time to prime the pump, you have to carefully do this process.
(Recommended to read: How to Vacuum Pool with Sand Filter Manually with Only 6 Steps)
So that is the tutorial on how to prime a pool pump that you can follow. The process is quite easy that can be done in no time. If you find that the pump is not primed, you can add more water or add the water through the pool’s skimmer directly.
To properly maintain your pool pump, below we share the simple tips that you can apply:
So, let’s add this How to Prime a Pool Pump Tutorial to your regular pool maintenance list!