How to Level Ground for Pool with Only 6 Steps | Fun DIY Project

You can’t just leave a swimming pool to add to your list of additions when you have a plan to give some improvements to your beloved house. This superbly enjoyable wear feature can surely bring fun for everyone.

Moreover, the existence of a swimming pool can also enhance the attractiveness of your outdoor living space. It always becomes the main focal point that grabs most of the attention. Therefore, investing your money in a swimming pool is always a good consideration that will never do you wrong.

For you who still want to install a swimming pool but have a limited budget, an above ground pool can be an alternative to keep in mind. There are hundreds of manufacturers that build above ground pools which are offered at affordable prices. The fun is surely the same as you install an inground pool. You can simply chill your body or hold a pool party with friends.

To install an above ground pool, you need to level the ground in the very first place. So you can have a flat-leveled area to properly set up an above ground pool. If you are willing enough, you can do the job all by yourself without any needs to hire a pro.

(You may also like: How to Clear a Cloudy Pool with Baking Soda with Only 4 Steps)

Check out the tutorial on how to level ground for pool below that will guide you to finish the job easily.

How to Level Ground for Pool Tutorial

Directly place an above ground pool is always a recommended option than installing it on a deck or patio since it may collapse due to the weight of the water. Therefore, leveling the ground on the location where you would like to install the pool is definitely necessary. The ground should be flat and level so you can properly set the pool.

Prepare the Area

how to level ground for pool 1

The very first thing that you have to do is preparing the site. It has to be free from any debris before you level it or they can damage your above ground pool.

  • Remove the grass and weeds that you notice on the site, you can use shovel or spade. Wet the area if necessary. Make sure that you remove all the grass and weeds with their root system to prevent them to grow back.
  • Pick the rocks that you spot in the area, do your best to completely remove them.

Check the Area

Inspect the levelness of the site that you would like to use to set up your above ground pool.

Prepare these tools:

  • Wood plank
  • Carpenter’s level
  • Stakes

Follow these steps:

  • You can start by inspecting the area with your visual and best judgment. Find the area which is lower and higher than the surrounding.
  • Attach the carpenter’s level to the wood planks by using string or zip tie. Move it throughout the area that you will place the pool on.
  • Mark the spots that you need to dig with stakes.

Dig the Higher Spots

Now, you can start digging the high grounds that you have inspected. Remember, you’re not digging to make patches or even holes, make sure that you dig to make the higher spots level with the rest of the area. Filling the patches with more dirt or stand will create a bad base for the pool.

Prepare these tools:

  • Shovel or spade
  • Wheelbarrow

Follow these steps:

  • Dig out the higher grounds with spade or shovel.
  • Store the soil into the wheelbarrow so you can use it for other gardening projects.

(Check this out: 9 Easy Steps on How to Acid Wash a Pool All by Yourself)

Recheck the Area

When you are sure enough that you have dug out the high grounds, you can recheck the levelness of the area.

  • Repeat the step when you check the levelness of the area for the first time with the carpenter’s level.
  • Correct the spots which still look higher than the rest.

Compact the Soil

The area for setting up the swimming pool also should have a compact surface, that’s why you need to tamp the soil after leveling the area.

Prepare these supplies:

  • Garden hose
  • Rolling tamper

Follow these steps:

  • Run the water through the garden hose and evenly water the soil of the area.
  • Compact the soil by using the rolling tamper properly.

(Read also: 4 Simple and Easy Ways on How to Lower Cyanuric Acid in Pool)

Add Fungicide and Herbicide

To prevent weeds from growing under your above ground pool, you will need to treat the soil with some chemicals. It’s a very important step since the area where you install the pool on will have high moisture which can invite the weeds to grow.

  • Apply the fungicide or herbicide around the area.
  • Follow the manufacturer’s instructions to find out the amount of chemicals that you need to use.
  • You need to wait for about 2 weeks to let the chemicals work in the soil.

(Recommended to read: How to Close a Pool Tutorial with 8 Easy Steps | DIY Pool Maintenance)

Well, those are the easy steps that you can follow when you are planning to install an above ground swimming pool in your outdoor living space. The tutorial on How to Level Ground for Pool above shows you an easy way to prepare the site for your above ground pool. Some help from a friend will surely ease the job.

Leveling the ground for your above ground swimming pool is such an easy job that you can finish in no time. You just need some easily-available supplies and tools to prepare the area. However, if you plan on having a large above-ground pool, you may need to hire a pro since it needs more complicated treatment and sophisticated tools.

Keep in mind to wear protective gear like work gloves and a dust mask during the project. Well, have a nice try on setting up your above-ground pool!

Leave a Reply