Electricity has the potential to cause serious harm in the workplace if safety precautions are ignored. A majority of the electrical hazards that occur in the workplace can be avoided by following simple precautions. But in case of any serious emergencies, you should quickly call nearby electricians so as to avoid any sort of mishap. In case you live in Dallas and you are searching for electrician in Highland Park, then you definitely need to do a lot of research as there are a bunch of professionals to choose from.
Well, talking about the safety measures that you can take, below are some of the prevention tips for common electrical hazards in the workplace.
- Unplug Appliances When Not in Use
One of the most important steps to take when it comes to electrical safety in the workplace is unplugging all unused appliances to reduce potential risks. Leaving appliances plugged in even when they are not in use could lead to overheating and overloading sockets. Unplugging appliances not only helps to prevent overheating, but it also allows you to save energy. Also, make sure your electrical outlets aren’t overloaded with too many devices and appliances.
2. Keep Electrical Devices Away from Sources of Water
Water and electricity can be a deadly combination, resulting in electrocution and electrical fires. You should keep electrical appliances, equipment, and cords away from water sources. Also, you should avoid using electrical devices or appliances with wet hands and always follow appliance instructions for improved electrical safety.
3. Install Power Surge Protectors
One piece of equipment you need in the workplace to prevent electrical hazards is a surge protector. These electrical device guards against the damage that power surges and current spikes can cause. It is wired into the electrical panel and works by switching the connection to ground voltage or blocking the excess current whenever a power surge or spike is detected. A power surge protector protects electronics and appliances in your workplace from power surges. If you’ve not installed a power surge protector in your workplace, a sudden voltage spike could damage your computers, televisions, and other plugged-in electronics.
4. Pay Attention to Warning Signs of Electrical Problems
Electrical fires, electrocution, and other electrical disasters in the workplace happen as a result of ignoring warning signs. Although some electrical problems may remain hidden for some time, most electrical issues are easy to identify as long as you look out for warning signs.
The common signs of electrical problems in the workplace include:
- Circuit breaker problems
- Flickering, buzzing or dimming lights
- Counterfeit electrical fixtures
- Arc faults
- Inexplicable electrical shocks
- Discoloration or scorch marks, and smoke on outlets
- Broken light switches and loose outlets
If you’ve noticed any signs that point to an electrical problem, it’s best to call an experienced electrician in Highland Park to inspect your electrical system and make repairs. At Mr. Electric of Dallas, we can inspect the entire electrical system in your workplace and identify any issues that may need to be addressed. You should never take a DIY approach when it comes to electrical work, whether it be in your home or office. Only qualified electricians in Coppell should perform electrical work in your office or business premises.
Need Electrical Service in Your Office or Business Premises? Mr. Electric of Dallas
Are you looking for an experienced electrician in Highland Park or an electrician in Coppell to provide you with electrical service in your office or commercial property? Mr. Electric of Dallas is a reputable electrical company that you can rely on for all of your workplace’s electrical needs.