Commonly, above ground pool liner is made of vinyl which is able to hold the weight of the water based on the size of the pool. Liner is a kind of delicate component which needs extra care when you are dealing with it. When it’s damaged, you will find the leaks which make it unable to hold the water properly.
If you are handy enough, you can install an above ground swimming pool all by yourself by simply following the manufacturer’s directions. Here, we’re going to show the right way to install an above ground swimming pool liner that you can use as a basic guide when you are about to install an above ground pool by yourself or to replace the old one.
(You may also like: 9 Easy Steps on How to Change Sand in Pool Filter All by Yourself Quickly)
Usually, you need to replace your old above ground pool liner with a new one when you find some leaks or stains. You don’t have to call any pros, just do the job carefully and you can get it done in no time.
If you’re going to replace the old liner with a new one, of course, you need to drain the water first and remove it from the pool. Be careful in draining your pool water, check the local water authority to find out rules on how to waste the water properly.
You can find above ground pool liners in local pool stores or online. They are typically offered at $100 to $900 based on the type, materials, and design of the liner. The overlap liners are offered at the lowest prices compared to the beaded and uni-bead liners.
(Recommended to read: How to Raise Cyanuric Acid in Pool with 3 Simple Steps Safely)
Even when you are about to replace the old pool liner in your existing above ground pool, you still have to get the base ready.
As mentioned above, the warm temperature will ease you to install the liner, so pick the right day. Do not rush the job, slowly install the liner to avoid any damage. Also, you can’t really finish the job all by yourself, some helps from a friend or two is really necessary.
(Check this out: How to Level Ground for Pool with Only 6 Steps | Fun DIY Project)
After you are sure enough that you have installed the liner properly in your above ground pool, you will find the shrink and wrinkles. This is unavoidable and you have to fix it.
Once you are sure that everything is in the right place, you can start filling your above ground pool with water. You can simply use a garden hose that is connected to the spigot or hire a water truck for a faster process.
(See also: 9 Easy Steps on How to Acid Wash a Pool All by Yourself)
The tutorial on How to Install Above Ground Pool Liner above shows you the easy steps to prepare your beloved above ground pool. With some help from some friends, you can have an enjoyable above ground pool with a fresh liner in no time.
Installing a liner for an above ground swimming pool is not a complicated job but you still have to do it very carefully. It’s a delicate component that can get easily damaged.
Today, you can find various kinds of pool liners which can also enhance the attractiveness of your above ground swimming pool. They come in catchy patterns to suit your needs and taste.
Well, have a nice try on installing your above ground pool liner!