Here Are 7 Steps On How to Remove Bathroom Tile by Yourself

Having a neat bathroom can be one of the best treats that you can invest in since it’s one of the important areas in a house that you will use every day. We can deny that the existence of the bathroom tile will complete the look of the bathroom either as an accent or as the main material. When it comes to tiles, some homeowners treat them carefully because as an accent, tiles will definitely give a different feel.

However, there are a few cases that require you to change the whole look of the bathroom by removing the tiles. On the other hand, you might just want to change the concept of your bathroom by doing a remodeling. Either it’s for remodeling or changing the current mood, removing bathroom tiles is something that you can do by yourself. We got your back and get ready to start!

(You may also love these: How to Install Fence Post Quickly all By Yourself with 6 Simple Steps)

In this article, we are going to give a tutorial on how to remove the bathroom tile floor. So, if you’re planning to update your bathroom floor, just keep reading because you might need this!

HOW TO REMOVE BATHROOM TILE

There are some tools and supplies that you have to prepare. Don’t worry because most of these materials are easy to find. Those are:

  • Face mask
  • Work gloves
  • Safety goggles
  • Hammer
  • Chisel
  • Pry bar
  • Scraper
  • Trash can
  • Broom or shop-vac
  • Utility knife

Once the materials are ready, let’s get started with the long process.

#1 Prep Well

A well-prepared working area will help a lot to make sure that the job runs smoothly.

  • First thing first, make sure to use protective gear.
  • Make sure that it’s well ventilated because removing tiles will cause debris and dust that might stuff you.
  • If your bathroom doesn’t have windows but an exhaust fan, you might want to cover the fan with plastic and seal all four sides. It’s to prevent debris from getting sucked by the fan.
  • If there are some items in the bathroom that might crack or damage like a shower door or partition made of glass and vanity mirror, you might want to take them off and move them to a safe area.

(You may also love these: 8 Steps on How to Drain a Pool Easily and Quickly All By Yourself)

#2 Remove Fixtures

  • Empty the room and remove any fixtures that may impede the process of removing the tile.
  • Turn off the water supply before removing a sink or toilet.
  • If removing a toilet, drain the reservoir, remove the bolt and rock the fixture to break the wax seal.

#3 Create a Starting Point

  • If the tile is installed around a vanity or other semi-permanent fixture, a bare edge will be exposed, providing a good starting point for removal.
  • If it’s wall to wall, you may need a hammer and chisel to break it and create a starting point for prying up tiles.
  • Some tiles may be attached using adhesives or mortar and may come up easily or require great effort. For this type of tile, you can use a hammer and chisel, pry bar, or pole scraper.

(You may also love these: How to Fix Leaning Fence Easily and Cheaply with 5 Quick Steps)

#4 Remove Tile

  • From the starting point, continue to pry up the tile.
  • Deposit tiles in a trashcan or large bucket as they are removed to minimize clutter.
  • Remember that tile can be heavy and an overfilled waste receptacle will be difficult to haul away.

#5 Access Underlayment

  • In some cases, tiling may have been attached directly to a concrete floor or sub-floor, but a plywood or mortarboard underlayment is common.
  • An inappropriate or damaged underlayment should be removed, but some may be left in place for re-use.
  • Access the underlayment and remove it to expose the sub-floor, if necessary.

(You may also love these: Here’s 4 Steps on How to Clean a Green Pool with Bleach Effectively)

#6 Remove Debris and Exposed Nails

  • Use a broom or shop vac to clear all debris from the floor.
  • If an underlayment has been removed, it may be necessary to remove or pound exposed nails to leave behind a flat surface.

#7 Inspect the Floor

  • Once the old tiles have been removed and before installing new tiles, inspect the subfloor for damage that may need to be repaired.
  • Patch or replace any rotten wood or divots in concrete floors.
  • The subfloor should be smooth and damage-free before a new floor is installed.

(You may also love these: How to Attach a Patio Roof to an Existing House with Only 5 Steps)

The process might look complicated and difficult, but if you love a DIY project, we’re sure you will enjoy every single step. It’s surely very pleasing to do DIY work by yourself but if you’re unsure about it and need some help, we would recommend contacting your trustworthy or licensed contractor to help you out. There are a few steps where you have to be careful, especially if you’re going to reuse the tiles on another spot.

So, are you ready to get your bathroom a new look by replacing the old tiles with the new ones?

Leave a Reply