6 Easy Tips On How to Repair Peeling Stain On Wood Stained Kitchen Cabinets

As the hub of the house, a kitchen is where all the delicious food is produced. It has a lot of ‘dramas’ that might cause spills and scratches here and there. One of the kitchen features that might face these problems is cabinetries. A kitchen cabinet is something that we can’t take out from a kitchen to organize everything. A kitchen cabinet can show some tired signs from various causes from harsh chemicals to simple daily use.

Depending on the material, the stain on a cabinet can be very visible and might bother your sight. The common material that is very easy to spot is a cabinet made of wood. Wooden cabinetries are indeed the most versatile and common material that many people use in their kitchen since it fits perfectly with any decor style.

(You may also like this: 8 Simple Steps on How to Install Above Ground Pool All by Yourself)

There are various things that can cause a peeling stain in a wood cabinet such as:

1. Improper Preparations. This means that there are some causes like the wood is not clean enough to finish the work, applying a new coat over a bad one, letting the old coat as it is before applying a new one, and others.

2. Wrong Sanding. In this phase means that the wood went under too much sanding process. Just like our skin, an excessive peeling process could break the natural barrier that protects the surface. This might also happen to the wood cabinet if you hard sand it.

3. Using the Wrong Stain. It’s important to pick the right stain for a specific wood because it will affect the overall finish. If the coat is too thick, it could make the furniture stain faster.

4. Multiple Stain Layers. Another mistake that causes a stain is by applying multiple layers of the coat before making sure that the first one is applied perfectly.

5. Using Poor Stain. Of course, using a good-quality stain will give a different finish and long-lasting neat look. Therefore, it’s recommended to do a quick research about the product first and decide on the final product later.

(You may also like this: 6 Quick Steps on How to Prime a Pool Pump All by Yourself)

Once you spot a peeling stain in your cabinetries, you might want to prepare some tools and supplies to do the repair process:

  • Protective gear
  • Sandpaper
  • Stain marker
  • Screwdriver
  • Scraper
  • Primer (optional for recoloring)
  • Damp cloth

After preparing those supplies and tools, let’s start the repairing process with some steps:

1. Know the Wood Type

As stated above that each wood type has its own texture and lines that need special treatment to create a perfect finish. By knowing the wood type, it’s easier for you to decide which primer and stain product that matches the wood itself.

2. Disassemble Each Part

If the stained part is on the door, you would have to remove the door so it’s easier to process. By using a screwdriver, remove the screws that hold the door. You will also have to remove the shelves if the stained spot is on the main cabinet.

(You may also like this: 9 Easy Steps on How to Change Sand in Pool Filter All by Yourself Quickly)

3. Clean the Surface

After spotting the stain and remove the stained part, it’s time to clean its surface first. Again, it’s better to remove the old coat or any stain first before applying a new one so it won’t add more stain on it. By using a scraper or sandpaper, remove the old coat. To make it easier, you might want to put a damp cloth first to soften the stain and wait until it’s dry. However, please make sure that you don’t go too far with the sanding that will only decrease the natural barrier.

4. Remove the Residue

After scraping and sanding the surface, the next step is to remove the residue left on it. You don’t want to fail the process by leaving the residue on it. Please make sure that the surface is all clean and soft. This process is to make sure that any dirt, grime, and grease are perfectly removed.

(You may also like this: How to Winterize an Intex Above Ground Pool with Only 6 Easy Steps)

5. Use Stain Marker If Needed

For a small area, you might want to use a stain marker instead since it’s faster and easier. One thing for sure is that you still have to make sure that the surface is clean from the old coat for a smoother application and finish.

6. Finishing

For larger cabinets, once you’re done with steps 1 – 4, it’s time to finish the work by applying a new stain coat. If you’re planning to recolor it, apply a paint primer. Last but not least, you might want to use a polyurethane coating to protect the overall work.

(You may also like this: How to Build a Wire Fence for Backyard with 7 Steps | Easy DIY Project)

Now you don’t need professional help to repair a peeling stain on your wood cabinetries because you can do it by yourself. Happy repairing!

Leave a Reply